60 Watt Waterproof LED Power Supply - Constant Voltage
IP67 60W Constant Voltage power supply. Designed for Indoor or Outdoor installations, and includes pre-wired NZ moulded plug.
Features
- Short Circuit / Overload / Over Temperature Protection
- Cooling by free air convection
- 100% Full Load Burn-In Test
- Suitable for Constant Voltage LED Lighting
- IP67 / CE / SELV / SAA
Specifications
Output
| DC Voltage | : 12V |
| Rated Current | : 5A |
| Current Range | : 0~5A |
| Rated Power | : 60W |
| Ripple & Noise (max) | : 150mV |
| Voltage Tolerance | : ±0.5V |
| Setup Rise Time | : 80ms / 220vAC |
| Hold Up Time (typ) | : 60ms / 220vAC |
Input
| Voltage Range | : 170 ~ 265vAC |
| Frequency Range | : 47~63hZ |
| AC Current (typ) | : 0.57A / 220vAC |
| Insrush Current (typ) | : Cold Start 50A / 220vAC |
Protection
| IP Rating | : IP67 Waterproof |
| Short Circuit | : Hiccpe mode, Recovers automatically after condition removed |
| Overload | : Protected 145-160% above peak rating |
| Over Temp | : Shut down o/p voltage, re-power on |
| Standards | : IEC 61347-2-13:2006, AS/NZS 61347.1:2002, EMC, SAA, ROHS |
| : AS/NZS CISPR 15: 2005+A1 : 2006+A2: 2008 |
Mechanical -
Dimensions : 180 x 68 x 53mm (L x W x H)
$70.00
SKU: PSU-60W-12V-IP67
Voltage:
12v DC
Fitting config:
Two wire input
Warranty:
1 Years 
Send to friend